xxxxx xxxxxx xxxxxx xxxxxx

กรุงเทพมหานคร

10210

[email protected]

xxxxxxxxxx

xxxxxxxxxx

xxxxxxxxxx

xxxxxxxxxx

จบการศึกษาแล้วเมื่อ พ.ศ2549

ปวส.

มหาวิทยาลัยขอนแก่น

วศบ.

วิศวกรรมไฟฟ้า(มี กว.)

2.20

ปวช.

Nongkhai Technical College

ปวส

อิเล็กทรอนิกส์ทั่วไป

3.27

12 ปี

เมษายน 2561 ถึง มีนาคม 2563

SG-Tech(Thailand) Co., Ltd.

-

Design and Service Engineer positions

40,000

- April 2018 – March 2020: Working at the SG-Tech (Thailand) Co., Ltd.
Position: Electrical Engineer
Salary: 40 ,000 B. (Only salary no other allowances.)
Responsibility:
Project B.O.Q and Estimate , Electrical and Electronic control Circuit Design for Machineries and Robot and PLC Design , PLC Programming and Editing according to Customer order and Customer service
- Programming Design and Circuit Design.
PLC Programming to NACHI Robot , IAI Robot , THK Robot , Janome Robot , CKD Motor , Oriental Motor and Inline Coating Machine , Servo Machines , Laser Marker Machines , Pick and Place Machines , Assembly Machines , Cutting Machines and Another Machines By Mitsubishi PLC HMI , Keyence PLC HMI , Omron PLC HMI Via DIO , Device Net , CC-Link , RS-232 , RS-485(Modbus RTU) , Ethernet and Barcode Scanner , another.
Electrical and Electronic Control circuit design and Drawing by Auto CAD , Proteus.

กันยายน 2555 ถึง ตุลาคม 2557

BTE Co., Ltd.

-

Design and Service Engineer positions

30,000

- Sep 2012 – Oct 2014: Working at the BTE Co., Ltd.
Position: Design and Service Engineer positions
Salary: 30,000 B. (Only salary but not included OT. And other allowances).
( If included as 43,000 to 45,000 B. M.( Include OT Only ) )
Responsibility:
- Electrical control circuit design.
Electrical Panel Design in Panel Layout, Control circuit Design by Cost Estimate (Cost Estimate using MAC 5 (Standard Costs software)) and Drawing drafting by myself (By using Auto CAD CAD 2010-2014(Electrical).
, Solid Works 2010 (Mechanical) and PLC HMI modify (Programming) also.
Thai Film Project, Water Treatment Projects and another Project according to order from the customers etc.
- Service the customer as the Water Treatment Project, Plastic Film Project, Tapioca Starch etc. and another concerned or responsible.
- Electronic Circuit test (Job by Job that concerned to microcontroller).
- Electrical control panel test.
Electrical Function Test , Megger and Di-Electric Test (Hipot Test) as IEC 60439-1 standard and Current Transformer Directional Test (the current’s flow test or polarity test).
- Such as MDB, DB, PLC, Motor Starter, Drive (VSD (Inverter each brands), Servo , Soft-Start) , and another panels
Function Test (Panel Test) as below followings.
Inverter Test (For the motor starting)
- Starting Motor Test, Parameter Setting (Digital I O parameter, Analog parameter, and another items have to connect to the plc or another devices etc.).

MDB and DB Test
- For MDB there are the Digital Power meters (DPM) various brands for parameter setting.
PLC Test
- Plc test such as the Analog signal test both between the plc to the VSD (Inverter), or temperature controller, or PH controller, or another transmitter or transducers etc. or all items combine within only one panel and Modbus, CC-Link etc. test.
- Various normally starter such as D.O.L starter

มีนาคม 2549 - พฤษภาคม 2549

การไฟฟ้าส่วนภูมิภาค จ.หนองคาย

วิศวกรรมไฟฟ้า

มีนาคม 2543 - พฤษภาคม 2543

DTAC (ในปัจจุบัน)

ช่างเทคนิค

พูด ดี อ่าน ดี เขียน ดี

พูด ดี อ่าน ดี เขียน ดี

Ms Word

Ms Access

Ms Powerpoint

Photoshop

Visio

3D Max / Viz

AutoCAD

Dreamweaver

HTML

ภาษา C#

Basic

Windows

ภาษาไทย  15  คำ/นาที ภาษาอังกฤษ  20  คำ/นาที

SolidWorks , Altium , Eagle PCB , Auduino , and other software which concern.

รถยนต์

รถจักรยานยนต์

รถยนต์

ซ่อมวงจรอิเล็กทรอนิกส์ ออกแบบวงจร , เขียนโปรแกรม PLC Controller SCADA , ออกแบบระบบนิวแมติกส์ , ซ่อมระบบนิวแมติกส์ Hydraulic และอื่นๆได้ , ออกแบบPCB , เขียนTochScreen , เขียนแบบ 2D 3D(Auto CAD 2008,Solidwoks2007) , เขียน Web site , ออกแบบระบบไฟฟ้าอาคาร ออกแบบไฟฟ้าควบคุม ,ซ่อมเครื่องจักร wiring (Electrical control) เชื่อมเหล็ก ประกอบเครื่องจักร และ อื่นๆได้ ออกแบบเครื่องจักร อ่านแบบเครื่องกล โครงสร้าง มีสภาวะความเป็นผู้นำ วางแผนการทำงานได้ สามารถทนต่อแรงกดดันได้ มีประสบการณ์เกี่ยวงานชิ้นส่วนเครื่องจักร เขียน micro-controller mcs51 , PIC , VB และ พอมีความรู้เรื่องภาษี กฏหมายด้านธุรกิจ

แข่งโครงงานวิทยาศาสตร์ โครงงานสิ่งประดิษฐ์ , ออกแบบระบบไฟฟ้าในโรงงาน , ทำโปรเจ็คออกแบบวงจรเครื่องมือวัดทางอุตสาหกรรม,เขียนโปรแกรม Microcontroller ทำป้ายไฟโฆษณา Dotmatrix , PLC Controller programming โดย Microcontroller และ อื่นๆ , ซ่อมเครื่องใช้ไฟฟ้า ติดตั้งระบบโทรทัศน์ , เคยทำงานเกี่ยวกับระบบโทรศัพท์บ้าน , เคยไปทำงานที่ต่างประเทศตามดปรเจ็คที่รับผิดชอบ , มีใบ กว. , มีผลงานเกี่ยวกับโปรเจ็คที่ต่างประเทศ และภายในประเทศ เกี่ยวกับงานออกแบบ

Resume
Personal details:
First Name: Mr. Rachapon Kromwangkon
Address: 327 Moo.11 Thabo District. Nongkhai 43110
Sex: Male Nationality: Thai Race: Thai Religion: Buddhism
Military statuses: Complete Age: 37 years old
Born: August 28 1980 in Nongkhai
Height: 176 cm. Weight: 60 kg.
Marital status: Single Health: Good
Email: [email protected]
Mobile No. : 084-6849089, 099-0241257

Education:
- June2002-March2006 Electrical Engineering Bachelor’s Degree, Khon Kaen University
(There is a License to practice engineering)
- June1999-February2001 Higher Vocational Certificate, Nongkhai Technical College
- June1996-February1999 Vocational Certificate, Nongkhai Technical College
Working and Training Experience:
- 20 March 2006 -10 May 2006: Practical Trainings course at the Provincial Electricity Authority
- 6 March 2000 – 5 May 2000: Practical Trainings course at the Total Access Communication Public Co, Ltd (or current DTAC)

-------------------------------------------------------------------------------------------------------------------------
- June 2006- June 2008: Working at the Bangna-steel Works Ltd., Part
Position: Electrical Engineer
Salary: 15,000 B. (Only salary but not included OT. And other allowances).


Responsibility:
- The electrical system , lighting system by Dialux V 4 software both in the starch factory , rice mill and another design and estimate (B.O.Q.) according to the responsible project and in the building such as the AA projects (In Thailand of 15 places ), Rekayasa Project (Indonesia) and Vietnam Project , China Project , Japan Project etc.
- The electrical control design.
- The PLC, HMI edit and programming by a Allen-Bladley PLC , Telemecanique PLC , OMRON PLC and another.
- The machine, P ID, Piping system, Machine Platform and foundation, Structure building drawings edit and design for the factory, Modify by using a Solid Works and AutoCAD.
- ASSY and Wiring in MDB, MCC, Switch Board, Plc Panel, Electrical Control Box.
- Responsible for Rekayasa Project and Herbal factory in the Indonesia (Ever been have went to the Indonesia) about the electrical systems assembly and edit the PLC and HMI and contact their about this project.
Reason for Resignation: Pain in the 2 eyes can’t work need to be cared, because the employer does not provide leave to heal and relax.

-------------------------------------------------------------------------------------------------------------------------
- September 2008 – August 2009: Working at the Imco Pack Corp. Ltd
Position: Maintenance Engineer
Salary: 18,000 B. (Only salary but not included OT. And other allowances).
Responsibility:
- Plastic Bottle Blower and another machines maintenance
- Electrical control wiring for the plastic machine.
- TPM plan as the ISO standard.
- The fabrication part design and modify by using the Solid Works and AutoCAD.
- PLC Modify and edit.
Reason for Resignation: Out the contract (One-year contract)

-------------------------------------------------------------------------------------------------------------------------
- January 2010 – January 2012: Working at the Sankei-Eagle (Thailand) Co., Ltd.
Position: Process and Electrical Engineer
Salary: 18,000 B. (Only salary but not included OT. And other allowances (If included other allowances as 35,000 B. M.)).
Responsibility:
- HDD machines (In the clean room such as the VCM Machine, Flex Machine , Outer Machine , Glue DOT Machine , Eraser Machine etc.) and another machine that concerned by ASSY Test , Debug, Packing and Delivery to the customers according to the customer order (Overall are the customer’s WD, Hitachi, Nifco, Nissan etc.).
- Electrical control, PLC Panel, Switch board and field wiring.
- PLC and HMI programming, edit by Mitsubishi, Keyence and another PLC, HMI.
- Customer service, maintenance, technical support.
- Fabrication parts and machine design modify and then packing to delivery to the customers according to order.
- Manufacturing plan and estimate
This the company is the small company only. Therefore there are no the various allowances (Be unsteady).
Reason for Resignation: Have no a policy to salary increase to personnel, No bonuses, No Over time and My mother have a fever needful go back to upcountry about 8 months (at Nongkhai Province).
-------------------------------------------------------------------------------------------------------------------------
- Sep 2012 – Oct 2014: Working at the BTE Co., Ltd.
Position: Design and Service Engineer positions
Salary: 30,000 B. (Only salary but not included OT. And other allowances).
( If included as 43,000 to 45,000 B. M.( Include OT Only ) )
Responsibility:
- Electrical control circuit design.
Electrical Panel Design in Panel Layout, Control circuit Design by Cost Estimate (Cost Estimate using MAC 5 (Standard Costs software)) and Drawing drafting by myself (By using Auto CAD CAD 2010-2014(Electrical).
, Solid Works 2010 (Mechanical) and PLC HMI modify (Programming) also.
Thai Film Project, Water Treatment Projects and another Project according to order from the customers etc.
- Service the customer as the Water Treatment Project, Plastic Film Project, Tapioca Starch etc. and another concerned or responsible.
- Electronic Circuit test (Job by Job that concerned to microcontroller).
- Electrical control panel test.
Electrical Function Test , Megger and Di-Electric Test (Hipot Test) as IEC 60439-1 standard and Current Transformer Directional Test (the current’s flow test or polarity test).
- Such as MDB, DB, PLC, Motor Starter, Drive (VSD (Inverter each brands), Servo , Soft-Start) , and another panels
Function Test (Panel Test) as below followings.
Inverter Test (For the motor starting)
- Starting Motor Test, Parameter Setting (Digital I O parameter, Analog parameter, and another items have to connect to the plc or another devices etc.).

MDB and DB Test
- For MDB there are the Digital Power meters (DPM) various brands for parameter setting.
PLC Test
- Plc test such as the Analog signal test both between the plc to the VSD (Inverter), or temperature controller, or PH controller, or another transmitter or transducers etc. or all items combine within only one panel and Modbus, CC-Link etc. test.
- Various normally starter such as D.O.L starter, Star-Delta Starter, Directional Switch Starter.
Brand’s Inverter , Soft-Start , DC Drive that be concerned such as the Fuji , Schneider , Mitsubishi , Yaskawa , Frecon , TEC , Emerson , etc.
And Previous Jobs there were so many responsible projects.
Reason for Resignation: Therefore needful be moved go back to upcountry to take care my mother then must be taken private business by contracting for the regarding to the electrical system at the buildings or house (at Nongkhai Province).
-------------------------------------------------------------------------------------------------------------------------

Relevant skills:
Computer skills:
- Document : Microsoft office 2003, XP, 2007 , 2010 or newest version , Microsoft Project 2007-2010 or newest version , Formula (completed software), Open Office , MAC 5 (completed software) and another.
- Drawing : Auto CAD 2008-2010 (2D, 3D) or newest versions, Electrical Auto CAD 2008 or newest versions , SolidsWork2007-2010 or newest versions , Sketch up Pro V7 , Dia Lux V4 , Misumi 3D Catalogue , E-Plan (Electrical E-Plan), Corel Draw X4 , Inventor , Catia etc.
- Programming, Design and Circuit :
Microcontroller : Turbo C 3.0 , Keil V8, Mikro C and Basic 8051 , Mikro C Pro PIC , Mikro basic Pro PIC , Micro Code Studio V3 , Visual Basic , Flow Code for PIC V4-5 , LDMikro 3.0 , MPLAB , Hi-Tech C , CCS Compiler , App inventor (Android App) , Soap Box Snap , Arduino Compiler
Electronic: Express PCB, Eagle Schematics and PCBs , Proteus , Altium DXP2004-R.10, PCB Wizard , Circuit Wizard , Electronic Workbench (Multisim) ) , Sprint-Layout 5.0-6.0 , PCB Creator
PLC and HMI : PLC (ZEN1.5) , Siemens PLC S7-200-300-1200 ( TIA Portal , Simatic Manager) , CX-One , ZelioV2 (Telemecanique) , Allen-Bradley RSlogix500 HMI (RSView32, Factory Talk View ME,Factory Talk View SE) , RS Linx Classic , RS Emulate500) , OPC Server , Modbus , RSLogix 5000 , RS Emulate 5000 , Panasonic PLC and HMI , Mitsubishi PLC and HMI (Modbus , CC-Link) , Fuji PLC and HMI , Keyence PLC and HMI , Automation Studio 5.0 Software Fluid Sim(Festo) (Pneumatic and Hydraulic designed software) , Proface HMI , DELTA PLC HMI , Koyo PLC , EZ OPC 5.1 , And Another PLC HMI
- Internet , LAN (Network System (Use , Setup )) , FAX , Scanner , Printer etc , HTML , Dreamweaver and another software (both using and setting-up) etc.

Other skills:
- Able to design the electrical power system in the factory , estimate the equipments and make the electrical drawings (such as the shop drawing , As-Built drawing, single line diagrams, control panel MDB, MCC, and layout) and able to the electrical and instrument equipments and know about the transformer installation PEA’s Standards.
- Able to edit the mechanical, foundation (in civil) and machine’s platform drawings (By using the Auto CAD and Solid Works both 2D, 3D) and know about the piping, valves and pumps and able to design , install and ASSY.
- Maintenance in the part of the furniture machines for the various furniture factories such as the IDEX Furniture Factory , SB furniture Factory etc. in the parts of the pneumatic, hydraulic, Control circuits (Electronic circuits), Plastic machine and another.
- Able to design the pneumatic and use the equipments that about designing and linking the plc of Allen-Bradley and Siemens S7-300 to Fluid Sim V.4 Pneumatic (FESTO Brand) software via PLCSIM OPC Server(RSLinx) and Another PLC via Modbus, CC-Link, Ethernet , Profibus and Analog Signal and another.
- Able to use Purchase resource (PR) and Maintenance sheet programs or completed software in maintenance the machines.
- Able to install the electrical and suppression and fire alarm systems.
- Able to wiring (in electrical control panel and another) and machine ASSY both the HDD machine ASSY and another machine.
- Able to design the lighting systems by using a DiaLux software.
- There is knowledge about the mechanical parts both the purchasing parts and machining parts (Fabrication parts or Machine Parts).
- Design the and Estimate the electrical control system and PLC for EVAP control system , Dust control system and piping system to Bridge Stone factory , Magautto factory , Valeo factory , Appico factory etc.
- Design , Modify , Wiring , ASSY , Estimate and Maintenance ( PLC , HMI , Electrical control System ) for Washing Machine , Clothes Dryers and Ironing Machine for Hospital , Hotel and another customers etc.
- Able to responsible in QC position (Sometimes) and Electrical Control Design and Service in Thai Film Project , Water Treatment Project , and Another Projects.
- Able to design in Electronic circuit and Microcontroller Programming and Fuji PLC HMI, Panasonic PLC HMI, SCADA, Mitsubishi PLC Omron PLC and Allen-Bradley PLC Programming etc and another plc.
- Analogue signal circuit for INV and PLC Test (0-10Vdc, 0-20mA and 4-20mA)(designed to microcontroller by myself).
- Wiring and install in the electrical system on Buildings or House (Wiring and Install by myself).
- Able to the metal welding (A little bit).
- Able to repair the TV, sound player, electronic control circuit and other appliances.
- Lalin Properties’s Project B.O.Q or cost estimates each project and Electrical System Design (Properties work scope).
Languages:
- Good for the speaking, reading, and writing.
Typing speed:
- English: 20 words minute.
- Thai: 15 words minute.
Project Course:
- 2005-Grounding Transformer and Protection system.
Driving skills:
- There are the car and motorcycle driving skills
- There is a car driving license.
Position applied:
- Maintenance Engineer, Electrical Engineer (Site or Project Engineer), Electronic Engineer, Design Engineer, QC Engineer.
Reference people:
- Mr. Preecha Thananant, B.Eng. King Mongkut’s Institute of Technology.
- Mr. Komsan Jornanan (Engineer of Sankei-Eagle)
- Mr. Sanea Wichaiya (Engineer of Bangna Steel Works)
- Mr. Weeradaech Utpin (Engineer of Sankei-Eagle)
- Mr. Pramote Chaichanamongkhol (Design Engineer of BTE)

xxxxx xxxx xxxxxxx